4
STEP 4: Display will read “New Code.”
Enter new Encryption Key value.
STEP 5: Display will read “Repeat.” Repeat new
Encryption Key value, Press Menu/OK.
STEP 6: Display will read “Code Saved.”
2.3 System Info
(View the system information)
STEP 1: Enter a valid code
STEP 2: Using the ▲ and ▼ scroll to the “System info”
and Press Menu/OK The screen will display Information
about the system, the following will be displayed:
2.4 Change Code
STEP 1: Enter a valid code.
STEP 2: Using the ▲ and ▼ scroll to the “change code”
and Press Menu/OK.
STEP 3: The display will show the message “Set code of
ID 02” to be changed.
STEP 4: Enter the new 6-digit-8 code and press Menu/OK.
STEP 5: Repeat the new code and press Menu/OK.
The New Code has now been saved and is available for use.
2.5 Enrolling New Users
STEP 1: Enter a valid code
STEP 2: Using the ▲ and ▼ scroll to the “Enroll New User”
and Press Menu/OK.
STEP 3: The next available ID position is displayed.
To select this ID, Press Menu/OK; or to select a different
ID position, Press ▲ and ▼ to the desired ID and
Press Menu/OK.
STEP 4: Now enter a 6-digit-8 code and Press Menu/OK.
STEP 5: Repeat new code and Press Menu/OK.
To Next Page
Loading...
