English Customer Service: 1-844-FIRMAN1
20
OPERATION
2.
will run for an additional 15 seconds as it goes through a cool down cycle before shutting off.
For remote stop only - Push and release the "STOP" button on the remote control. The generator
STOP
3. Flip the engine switch to“OFF”(O) position.
4. Flip the battery switch on "OFF"(O) position.
STOP
If a cover is used, do not install until unit has cooled.
5. Turn the fuel valve to the “OFF”(O) position.
The battery switch always should be in "OFF"(O) position at the end of use to prevent battery drain.
NOTICE
To Next Page
Loading...
