EasyManua.ls Logo

Firstcom FR-488 - Sending 2-Tone Call; Sending 5-Tone Call; Sending DTMF Call; Signaling Combination Setup

Firstcom FR-488
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
8
Sending 5-Tone Call
Press
2.
/ k e y to c h o o s e
No.04 menu, LCD displays "5TON
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending 5TONE group,Press PTT to
transmit selected group.
Total:100groups,00-99,Default:00.
4.
Press
5.
key to conrm and exit.
General Setting
Content and name of 5TONE will be edited by programming
software.This radio only query edited group or name.If there is
corresponding name for 5TONE,this operation will display 5TONE
corresponding name.
transmit the pre-stored 5-Tone signaling.
In 5Tone signaling mode,press
for 2s until LCD displays
"AN---",turn selector knob to select desired digit(caller ID).In
this mode,press
to conrm exist digit and move cursor to
next,press to forward cursor.After editing,press key to
operate ANI call.
Press
4.
key to conrm and exit
Sending 2-Tone Call
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ k e y to c h o o s e
No.03 menu, LCD displays "2TON
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending 2TONE group,Press PTT to
transmit selected group.
Total:32groups,00-31,Default:00.
4.
Press
5.
key to conrm and exit.
Content and name of 2TONE will be edited by programming
software.
This r adio o nly que ry edi ted gro up or nam e.If th ere is
corresponding name for 2TONE,this operation will display 2TONE
corresponding name.
Press and hold
1.
key for over 2s to enter general setting menu
Sending DTMF call
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ k e y to c h o o s e
No.05 menu, LCD displays "DTMF
XX","XX"indicates the group in the list.
Turn selector knob to select the desired
3.
sending DTMF group,Press PTT to
transmit selected group.
Total:16groups,00-16,Default:00.
4.
Press
5.
key to conrm and exit.
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.

Table of Contents

Related product manuals