www.firstechonline.com
|
www
.compustar.com
Copyright 2022 Fi rstech , LLC. “Are you not entertained…?” Page
38
Universal Security Control Module
Install.myfirstech.com
CM2500
Master
Guide
STEP 4: Push the valet button 5 times holding it on the 5
th
time for the following time lengths to
reach the desired feature group:
1) 2 seconds → Option Group #1 (w/ light flash 1 time and siren/horn 1 chirp)
2) 4 seconds → Option Group #2 (w/ light flash 2 times and siren/horn 2 chirps)
3) 6 seconds → Option Group #3 (w/ light flash 3 times and siren/horn 3 chirps)
4) 8 seconds → Option Group #4 (w/ light flash 4 times and siren/horn 4 chirps)
If you would like to reset all features to their default option setting push the valet button 10 times
and hold on the 10
th
time. Once complete, the parking lights will flash, and siren/horn will
sound 5 times to confirm reset.
STEP 5: Once the Option group has been selected release the programming button. Then push
and release the programming button again to select the feature number you wish to
change. Once selected, wait for the parking light flash, and siren/horn to sound
confirming the feature number you have selected.
STEP 6: Once you have confirmed the feature you’ve selected push and release the valet button
to select the desired option. Once selected wait for the parking lights to flash and the
siren/horn to sound confirming the option you have selected.
STEP 7: Once finished turn ignition off, please test function to verify successful feature option
change
Option Programming Using a Remote
Using a remote is a timed process so review this section before beginning. Options cannot be
programmed with 1 button remotes. IMPORTANT: Special Option Groups cannot be programmed
with remotes - OP500 must be used.
STEP
1: Select the option you wish to program. (Use the corresponding table shown on the
following page
)
STEP 2: Scroll through menu waiting for 1 parking light flash and/or siren chirp per line.
STEP 3: Once finished scrolling through menu, wait for the parking lights and/or siren chirp to
confirm the option number. i.e., option 2-04 will flash and/or chirp 4 times. Select your option
using the Lock, Unlock, Trunk, or . buttons.
To Next Page
Loading...