Firstech CM2500 - Troubleshooting

Alarm
System
www.firstechonline.com | www .compustar.com
CM2500
Install
Guide
Copyright 2022 Fi rstech , LLC. “Are you not entertained…?” Page
40
Universal Security Control Module
Install.myfirstech.com
CM2500
Master
Guide
How to Program Options With 1 Way Remotes
Wait for chirp between each button hold Scroll Through (Wait for flash tap)
Wait for corresponding parking light flash and/or siren chirps before selecting option
Select Option 1 Select Option 2 Select Option 3 Select Option 4
Option
Menu 1
Lock + Unlock for 3 seconds
then Lock + Unlock for 3
seconds
Hold Trunk
+ Key for 3
seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key
Button
Hold Trunk
+ Key for 3
seconds
Option
Menu 2
Lock + Unlock for 3 seconds
then Lock + Key for
3 seconds
Hold Trunk
+ Key for 3
seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key
Button
Hold Trunk
+ Key for 3
seconds
Option
Menu 3
Lock + Key for 3 seconds
then Lock + Unlock for 3
seconds
Hold Trunk
+ Key for 3
seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key
Button
Hold Trunk
+ Key for 3
seconds
Option
Menu 4
Lock + Key for 3 seconds
then Lock + Key for 3
seconds
Hold Trunk
+ Key for 3
seconds
Tap Lock
Button
Tap Unlock
Button
Tap Key
Button
Hold Trunk
+ Key for 3
seconds
Troubleshooting
Alarm LED Diagnostics
When the alarm is triggered the standalone LED or the LED in the FMX antenna (if present) will
flash a certain number of times as shown in the table below. This is intended for users with 1
Way
remotes.
2 Flash
Door Input
3 Flash Shock stage 1
4 Flash Shock stage 2
5 Flash Tilt
6 Flash
Ignition on
7 Flash Hood Input
8 Flash
Trunk Input
9 Flash AUX sensor stage 1
10 Flash
AUX sensor stage 2