Fischer Panda Panda 15000i PVMV-N User Manual (English)

Questions and Answers:

P
pibarraJul 29, 2025
Why won't my Fischer Panda Panda 15000i PVMV-N diesel motor start?
- M
  Michelle JordanJul 29, 2025
  If your Fischer Panda Portable Generator's diesel motor fails to start, here are a few things to check: * First, make sure the starter battery switch is in the "ON" position (if your generator has one). * Next, inspect the battery terminals and cables, ensuring they are well-connected and free from corrosion or damage. * Finally, during starting, the battery voltage should drop to around 11V if fully charged. If it doesn't drop at all, there might be a faulty electrical connection. If it drops below 11V, the battery is likely discharged.
M
melissadayAug 4, 2025
What to do if the starter motor turns but the Fischer Panda Panda 15000i PVMV-N fails to start?
- J
  Jay BurnettAug 4, 2025
  If the starter motor is turning the engine, but your Fischer Panda Portable Generator won't start, consider these possibilities: 1. A fuel inlet solenoid valve might not be opening. Check the wiring and circuitry to the solenoid valve. 2. The fuel pump may not be working. Inspect the fuel filter and pump, cleaning if necessary. 3. There might be a lack of fuel. Verify the fuel supply. 4. Glow-plugs might not be functioning correctly. Check the glow plugs and their heating time. 5. Too much air could be in the fuel lines. Test the fuel system for leaks and bleed any air from the system. 6. The fuel filter may be blocked. Replace it if needed.
J
Jennifer CarterAug 10, 2025
Why Fischer Panda Panda 15000i PVMV-N is not able to start an electric motor?
- J
  John CooperAug 10, 2025
  If your Fischer Panda Portable Generator is not able to start an electric motor, it's likely because the motor requires too much current when starting. You can check the motor's current draw or consider using stronger capacitors or installing an optional Easy Start Booster Set. Contact your Panda dealer or the manufacturer for more information.
T
Timothy RobersonAug 16, 2025
How to troubleshoot low output on a Fischer Panda Portable Generator?
- V
  Victoria LewisAug 16, 2025
  If the output of your Fischer Panda Portable Generator is too low, it could be due to the following reasons: * The generator (PMGi) might be overloaded. Try reducing the electrical load by switching off some devices. * The motor may not be reaching its rated RPM. Consult the "motor faults" section for troubleshooting.
A
Alexis WellsAug 22, 2025
Why does the voltage fluctuate on my Fischer Panda Panda 15000i PVMV-N?
- S
  simsshelleyAug 22, 2025
  If your Fischer Panda Portable Generator voltage fluctuates, it could be due to disturbances on the electrical system or user side. Check if the electrical load is fluctuating. Also, motor disturbances may be the cause. Refer to the section on "Motor runs irregular".

Fischer Panda Panda 15000i PVMV-N Specifications

General

AC Output (Continuous)	12 kW
AC Voltage	230 V
Frequency	50 Hz
Fuel Type	Diesel
Engine	Fischer Panda FPE320
Phase	Single-phase
Start Type	Electric Start

Summary

Current Revision Status

Document Revision History

Information on manual revisions, current version, and replacement history.

General Instructions and Regulations

Safety First!

General safety warnings and symbols used in the manual.

Tools

Lists required tools for maintenance and installation.

Manufacturer Declaration

Compliance statement for machinery directive.

Customer Registration and Guarantee

Benefits of product registration and warranty information.

Safety Instructions - Safety First!

Detailed safety instructions for operation and handling.

Warning and Instruction Signs

Explanation of warning and instruction symbols.

In Case of Emergency First Aid

WHEN AN ADULT STOPS BREATHING

Step-by-step guide for rescue breathing in emergencies.

Basics

Intended Use and System Components

Defines purpose and outlines key system components.

Transport and Storage Procedures

Guidelines for generator transport, loading, and long-term storage.

The Panda Generator

Generator Type Plate and Views

Identification of generator parts via type plate and diagrams.

Details of Function Units

Explains the function and operation of various system units.

Installation Instructions

Personnel and Safety Requirements

Specifies installation personnel qualifications and safety precautions.

Installation Procedures

Covers placement, connections, fuel, DC, electrical, and cooling systems.

Tables

Technical Data

Presents detailed technical specifications for generator models.

Coolant and Oil Specifications

Information on coolant types, mixtures, and engine oil requirements.

Panda iControl2 Operating Manual

Current Revision Status

Information on manual revisions, current version, and replacement history.

Safety Instructions for Panda iControl2

Critical safety guidelines specific to the iControl2 system.

General Operation

Panda iControl2 Panel Overview

Interface and button functions of the iControl2 control panel.

Daily Checks and Preparation

Essential checks before operating the generator.

Operating Modes

Description of various generator operating modes and transitions.

Other Operating Functions

Settings and functions like setup menu, autostart, and service interval.

Installation

Personnel and Installation Warnings

Requirements for installers and critical safety warnings.

Component Disposal

Guidelines for the proper disposal of generator components.

Wiring and Panel Connections

Details on wiring the iControl2 controller and panel connections.

Maintenance

iControl2 Controller Maintenance

Maintenance procedures for the iControl2 controller.

Generator Maintenance Procedures

Covers oil checks, filter replacement, and V-belt maintenance.

Warnings and Error Messages

Generator Warnings

Explanation of warning messages and their display.

Faults and Error Messages

Details on fault messages, causes, and generator shutdown.

Error Memory Access

How to access and interpret the iControl 2 error memory.

Annex

Technical Data

Supplementary technical specifications for the iControl2 system.

Inverter Panda PMGi

Safety Instructions and Type Plate

Critical safety guidelines and identification for the PMGi inverter.

Front Panel Connections

Visual guide to PMGi front panel connections for various models.

PMGi Input and Output Details

Information on PMGi input, AC output, and control connections.

Settings for iGenerators with Power Inverter

Configuration guidelines for using PMGi with iGenerators.

Operation Manual and Cooling

Operating procedures, status LEDs, and cooling system maintenance.

PMGi Installation and Electrical Connections

Mounting, cooling water, and electrical connection procedures.

PMGi Technical Data

Detailed technical specifications for PMGi inverter models.

PMGi Protections

Information on short circuit and overload protections for the PMGi.

Related product manuals

Panda PMS-HD 12-4KU

148 pages

Fischer Panda Panda 8000

268 pages

Fischer Panda Panda 5000i PMS

166 pages

Fischer Panda Panda 6000i PMS

106 pages

Fischer Panda Panda 4800i PMS

180 pages

Panda AGT-DC 4000 PMS

32 pages

Fischer Panda 15000i PMS

176 pages

Fischer Panda 15000i PVK-U

180 pages

Fischer Panda 7K PMS

168 pages

Fischer Panda 8000i PMS

204 pages

Fischer Panda 5000i PVK-U

174 pages

Fischer Panda 4000s PMS SCB

118 pages

Fischer Panda Panda 15000i PVMV-N User Manual

Table of Contents

Questions and Answers:

Fischer Panda Panda 15000i PVMV-N Specifications

Summary

Current Revision Status

Document Revision History

General Instructions and Regulations

Safety First!

Tools

Manufacturer Declaration

Customer Registration and Guarantee

Safety Instructions - Safety First!

Warning and Instruction Signs

In Case of Emergency First Aid

WHEN AN ADULT STOPS BREATHING

Basics

Intended Use and System Components

Transport and Storage Procedures

The Panda Generator

Generator Type Plate and Views

Details of Function Units

Installation Instructions

Personnel and Safety Requirements

Installation Procedures

Tables

Technical Data

Coolant and Oil Specifications

Panda iControl2 Operating Manual

Current Revision Status

Safety Instructions for Panda iControl2

General Operation

Panda iControl2 Panel Overview

Daily Checks and Preparation

Operating Modes

Other Operating Functions

Installation

Personnel and Installation Warnings

Component Disposal

Wiring and Panel Connections

Maintenance

iControl2 Controller Maintenance

Generator Maintenance Procedures

Warnings and Error Messages

Generator Warnings

Faults and Error Messages

Error Memory Access

Annex

Technical Data

Inverter Panda PMGi

Safety Instructions and Type Plate

Front Panel Connections

PMGi Input and Output Details

Settings for iGenerators with Power Inverter

Operation Manual and Cooling

PMGi Installation and Electrical Connections

PMGi Technical Data

PMGi Protections

Related product manuals