Fisher & Paykel ACTIVESMART RS32A72 - Installation Preparation

22
WARNING!
●
Be careful when working with the appliance outside of the finished enclosure.
●
Ensure that the appliance is secured to prevent tipping forward. Tippingofappliance can lead to serious injury or death.
Internal box
X
Install
fasteners kit
M5 x 10 Pan Head Philips Screw
M5 x 10 Pan Head Philips Screw
M5x10 cross-head screw
(10)
Tools
Cross-head screwdriver
Powered driver (optional)
Remove hinge end caps
1
Open the French doors carefully.
4
Loosely screw (1 – 2 turns) M5x10 cross-head
screws into doors (D).
Repeat this process for all appliance doors.
1 – 2 turns
D
150
C
180
L
O
P
B
150
C
180
L
O
P
A
150
C
180
L
O
P
C
2
Remove the left hinge end cap.
– Hold onto the corner of the end cap,
firmlypush to the right to disengage the
securing hook and pull down (A).
– Pull cap gently towards the left hinge
toremove (B).
– Keep the end hinge cap for later installation.
3
Remove the right hinge endcap.
– Pressonthe center of the cap and push
towards the right hinge to remove (C).
– Keep the end hinge cap for later installation.
!5 INSTALLATION PREPARATION