23
3
Fix the top trim by screwing #12x12 countersunk
screws (D) through the screw holes of the top
trim and hinge brackets.
Internal box
X
Install
fasteners kit
#12x12 Countersunk
cross-head screw
(2)
Tools
Cross-head screwdriver
Powered driver (optional)
Install the top trim
1
Position the top trim on top of the top cover of the
appliance (A).
2
Align the small screw hole of the top trim with the
screw hole of the hinge bracket (B).
– Ensure the front face of the top trim is flush
with the front face of the top cover (C).
Do this step to both right and left hinge brackets.
A
D
Top cover
B
C
Small screw hole
Top trim
Top trim front face
flush with top cover
front face
!6 TOP TRIM INSTALLATION
To Next Page
Loading...
