Fisher & Paykel ACTIVESMART RS9120W - ATTACH FIXING BRACKETS; Fixing Bracket and Screw Cover Installation

25
1
Carefully open the refrigerator door to attach
the fixing brackets. Place fixing bracket over the
side of the refrigerator and secure mid-way with
M5x8 countersunk Phillips screws (2x).
2
Secure the center of each fixing bracket to the
side of the adjacent wall with screws #8x19 twin
thread screws (2x).
Repeat this process for the remaining brackets.
3
Slide screw cover in between the fixing bracket
and the side bracket on the refrigerator.
Repeat this process for the remaining
screwcovers.
4
Fix screw cover by tightening screws M5x8
countersunk Phillips screws (2x).
Repeat this process for the remaining screw.
@0 ATTACH FIXING BRACKETS