3
1.0 SPECIFICATIONS
1.1 Product Dimensions
GC600 Series GC900 Series GC9002/GC36
Series
Length 578mm 860mm 914mm (36")
Width 511mm 511mm 533mm (21")
Depth below bench 40mm 40mm 40mm (1
5
/
8
")
1.2 Model Explanation
GC = Gas Cooktop
600 = 600mm wide
900 = 900 mm wide
9002 = 900mm wide, Series 2
F = Flame Failure
W = Woprk
C = Cast Iron Pan Supports
Q = Quantum sub-brand
JET = Quantum Model Name
GC36WAC = 36" Gas Cooktop for USA With Auto Reignition and Griddle Burner
1.3 Bench Cut-Out Dimensions
GC600 Series GC900 Series GC9002/GC36
Series
Length 560mm 842mm 842mm (33
3
/
16
")
Width 490mm 490mm 490mm (19
3
/
8
")
Depth for clearance 45mm 45mm 45mm (1
3
/
4
")
Clearances (USA Only)
§ Minimum horizontal distances from side and back of appliance to adjacent vertical combustible
walls (extending a minimum of 18" (457mm) from above the top panel) must be 4" (100mm)
from the left side wall, 1" (25mm) from the right side wall and 2
1
/
2
" (64mm) from the rear wall.
§ Minimum horizontal distance from front edge of counter to front side of appliance 2
1
/
2
"
(64mm). Where this reduces the distance between the back edge of the appliance and the
adjacent wall to less than 2
1
/
2
" (64mm), this wall must be of a non combustible material.
§ Minimum clearance to combustible surface centred above cooking surface 30" (762mm).
§ Minimum horizontal distance between overhead cabinets installed on either side of this
appliance 36" (914mm).
§ Maximum depth of overhead cupboards, 13" (330mm).
§ These distances shall be from the outermost edge of the top panel.
To Next Page
Loading...
Need help?
General
