3. Take the inner pane (C), holding it with the angle-cut corner orientated as shown. Insert it in the uppermost pair
of grooves (1), push it slightly towards yourself (2) and gently lower into place (3).
Make sure that the angle-cut corner of the inner pane (C) is at the bottom of the
oven door, on the left-hand side. It has to be in this position for the door to
function correctly.
Check that the gasket (D) is in place. It should sit on the inner pane of glass in the
centre as shown.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1…
Updated: Fri, 21 Aug 2020 14:54:17 GMT
Powered by
15
To Next Page
Loading...
