4. Position the glass retainer, as shown. It should sit on the bottom edge of the outer glass (A). Check that the
clamps of the glass retainer are not deformed or damaged.
5. Gently push the glass retainer back into place. You should be able to hear the tabs on both sides click as they
lock the glass retainer in.
Make sure the glass retainer is correctly and firmly in place and that the glass
panes are secure.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1…
Updated: Fri, 21 Aug 2020 14:54:17 GMT
Powered by
16
To Next Page
Loading...
