27
WASH OPTIONS
When washing an unusual load, eg large bulky garments, items or pillows, we recommend
you select the DELICATE cycle. If there is already water in the bowl, it is best to manually
select the water level.
z
The levels marked on the agitator do not correspond
exactly to the level of the water. They indicate the level
of dry clothes suitable for the water level.
z
Your washer may occasionally add water during
agitation. This is to maintain the water level due to the
release of air trapped in the garments.
z
Out of balance loads, tangling or splash-over can be
caused by selecting a water level that is too high.
Water Level
Auto water level (not available on QuickSmart™ washer)
Manual water level selection
The agitator has five levels marked on its stem that can be used to help you select the
correct water level. Select the correct water level by using the mark nearest to the top of
the load.
1
Place your clothes in the machine and select
the wash cycle. Press AUTO water level if not
automatically selected.
2
Touch . The machine will automatically fill
to the correct water level for the load, for
both phases of the wash.
To Next Page
Loading...
Need help?
General
