EasyManua.ls Logo

Fisher & Paykel SMARTDRIVE PHASE 7 - 1 Specifications; Dimensions; Maximum Capacity (Full Load) (as 2040); Water Consumption

Fisher & Paykel SMARTDRIVE PHASE 7
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
517790D
6
1 SPECIFICATIONS
1.1 Dimensions
Compact Washer Medium Washer Large Washer
Height to lid
Open 1320mm – 1350 mm 1360mm – 1390 mm 1410mm – 1440mm
Closed 950 mm – 980 mm 950 mm – 980 mm 950mm – 980mm
Height to console 1010 mm – 1050 mm 1010 mm – 1050 mm 1010mm – 1050mm
Width 560 mm 600 mm 650mm
Depth 560 mm 600 mm 650mm
Inlet hose length 1200 mm 1200 mm 1200mm
Packed weight 50.4 kg 55.3 kg 60.5
Unpacked weight 43.5 kg 47.7kg 52.0
Note: Exact height of the SmartDrive
is dependent on how far the feet are inserted into the
base of the machine.
1.2 Maximum Capacity (Full Load) (AS 2040)
Compact Washer Medium Washer Large Washer
Dry Weight 5.5kg 6.5kg 7.5kg
1.3 Water Consumption
Compact Washer Medium Washer Large Washer
Fill (High) 65 litres 75 litres 90 litres
Spray & Deep Rinse 130 litres 150 litres 175 litres
Save Water 110 litres 130 litres 150 litres
Eco Rinse 73 litres 90 litres 105 litres
1 Deep Rinse 120 litres 140 litres 165 litres
2 Deep Rinse 160 litres 190 litres 215 litres
*Note: Approximate water consumption for a high water level load for each rinse option
offered.
1.4 Water Fill Temperature (Approximate Factory
Settings)
MW Washer GW Washer
Supply Water Fill Temp Supply Water Fill Temp
Hot Supply temperature Hot 60
o
C
Warm 36 - 38
o
C* Hot / Warm 50
o
C
Cold Supply temperature Warm 40
o
C
Warm / Cold 35
o
C
Cold Plus 20
o
C
Cold Supply temperature
Recommended hot water inlet temperature 65
o
C. (Max)
*Dependent on hot and cold supply temperatures and water pressures
1.5 Wash Motor
Electronically commutated direct drive 3 Phase brushless DC Motor’ 36 Poles.
Copper Wound Stator: Resistance per Phase 16 +/- 10% @ 20
o
C. Refer Section 2.7.
Aluminium Wound Stator: Resistance per Phase 25.5 +/- 10% @ 20
o
C. Refer Section 2.7.
1.6 Pump Motor
Part Number Voltage Frequency Resistance
420324P 230V AC 50Hz 33 +/- 8% @ 20
o
C
426491P 230V AC 60Hz 28.8 +/- 8% @ 20
o
C
Note: Thermal cut-out fitted

Table of Contents

Related product manuals