517790D
7
1.7 Water Valves
Supply Mode of Operation Voltage Resistance Flow Rate
Cold Digitally Operated 24V DC 64Ω @ 20
o
C 16 litres per minute
Hot Digitally Operated 24VDC 64Ω @ 20
o
C 10 litres per minute
Note: Flow rate will vary slightly depending on pressure.
Operating pressures: Maximum 1034 kPa (150psi) / Minimum 34 kPa (5psi)
Note: Pressures below 34kPa (5psi) can create seating problems with the internal
diaphragm of the valve, and may cause water to drip into the inner bowl when the machine
is not in use.
1.8 Thermistor (GW Only)
NTC-type temperature sensor (Thermistor) Resistance 10,000Ω @ 25
o
C
1.9 Cabinet
Pre-painted steel
1.10 Lid
ABS plastic (co-injected)
1.11 Top Deck
Polypropylene
1.12 Inner Bowl
Stainless steel: Grade 430T
Bowl base and balance ring: Polypropylene
Inner Bowl Weights
Compact 7.303kg +/- 225g
Medium 9.225kg +/- 175g
Large 10.480kg +/- 275g
Inner bowl speed
Fast Spin 1,000 RPM
Medium Spin 670 RPM
Slow Spin 300 RPM
Stir Speed 25 RPM
1.13 Outer Bowl
Aluminium insert over-moulded with polypropylene
1.14 Console
ABS plastic with ABS plastic insert for display module.
1.15 Agitator
Polypropylene
To Next Page
Loading...
