THE MENU SYSTEM
The entire menu is printed on the LCD display. The display highlights the mode and
settings which are in use.
There are three search modes, Static All Metals, Motion All Metals, and Discrimination.
To change between an All Metals modes and Discrimination mode, the top line of the
menu system must be highlighted. Press the MENU button until the top line of the menu is
highlighted. When either All Metal or Discrimination is highlighted, rotate the
SETTINGS knob to move between the two categories.
Each search mode has several adjustable function settings:
ALL METAL: Threshold, Audio Pitch, Sensitivity, and Manual Ground Balance
DISCRIMINATION: Sensitivity, Discrimination Level, Notch, Number of Tones, and
Process Number.
To select a function, push the MENU button and continue pushing in order to move to the
function you want. The word SETTING will pop up in the middle of the display, and the
present setting of that function will be displayed as a number.
To change a setting, rotate the knob.
To increase a value, rotate to the right (clockwise)
To decrease a value, rotate to the left (counterclockwise)
If you select a function and do not make a change to that function after 7 seconds, the
detector will exit the menu system automatically, deactivate the SETTINGS knob, and
resume normal operation.
If you press the MENU button while the machine is in normal operation, the user interface
will return to the last menu feature setting. This feature allows you to have quick access to
a function that you want to adjust frequently.
To Next Page
Loading...
Need help?
General
