Need help?Do you have a question about the Fisher Scientific accumet AR50 and is the answer not in the manual?
General| Calibration Points (pH) | Up to 5 points |
|---|---|
| Type | Benchtop Meter |
| mV Range | ±2000.0 mV |
| mV Resolution | 0.1 mV |
| mV Accuracy | ±0.2 mV |
| Temperature Range | -5.0 to 105.0 °C |
| Temperature Resolution | 0.1 °C |
| Conductivity Resolution | 0.01 μS/cm to 0.1 mS/cm |
| Display | LCD |
| Calibration Points (Conductivity) | Up to 3 points |
| Inputs | Conductivity, Temperature |
| Outputs | RS232 |
| Power | AC Adapter |
| Interface | RS232 |
| pH Range | -2.000 to 20.000 pH |
| Data Logging | Manual and automatic data logging |
Lists components included when the meter is purchased as a kit.
Lists components included when the meter is purchased without a kit.
Details about the meter's display resolution and dimensions.
Specifies memory capacity and data storage/output features.
Provides specifications for pH, mV, and Ion measurement modes.
Details conductivity measurement and temperature sensing specifications.
Covers general meter specifications and operating environment conditions.
Identifies and explains the rear connector panel layout and ports.
Instructions for connecting the electrode arm and the power cable.
Guide to connecting pH and ion specific electrodes to the meter.
Proper procedures for rinsing, storing, and caring for electrodes.
Instructions for connecting 2-cell and 4-cell conductivity probes.
Procedures for rinsing and storing conductivity probes between uses.
Introduction to the meter's touch screen and standby screen.
Explains touch screen functionality, button logic, and maintenance.
Guide to navigating main, channel, and dual screens for measurement.
Details on switching channels, accessing dual view, and finding system setup.
Explains functions of buttons like standby, channel, mode, enter, save, exit, help.
Details functions of buttons like std, meas, setup, print, edit, clear, backspace, delete.
To Next Page