Instruction Manual
D200129X012
2506/2516 Receiver/Controller
June 2017
6
Actuator Yoke Mounting
See figure 4 for a typical mounting plate. Key numbers are shown in figure 5.
1. Locate the mounting plate (key 164, figure 5). Select appropriate mounting holes in the mounting plate for the
receiver/controller. Then, align the mounting holes in the mounting plate with the mounting holes in the
receiver/controller case.
2. Place the two cap screws (key 48) through the mounting plate from “back to front”. Engage the cap screw threads
in the mounting holes in the receiver/controller case and tighten the cap screws to attach the mounting plate to the
back of the receiver/controller.
3. Place cap screws (key 39) through the yoke mounting holes in the mounting plate from “front to back”. Place a
spacer (key 174) over the threads of the cap screws extending from the mounting plate to properly separate the
mounting plate and the lower yoke boss of the actuator (figure 5).
4. Attach the mounting plate with receiver/controller to the lower yoke boss of the actuator yoke. Be sure the spacers
support the mounting plate. Be sure the receiver/controller is parallel with the actuator yoke and then tighten the
cap screws into the yoke boss.
5. If supply pressure is piped through a filter/regulator, bolt the regulator directly to the upper yoke boss using the cap
screws (key 85). Provide appropriate piping from the filter/regulator output connection to the receiver/controller
supply connection.
Figure 4. Mounting Plate for Yoke Mounting, Wall
Mounting
IC2218‐E
13
(0.50)
83
(3.25)
57
(2.25)
13
(0.50)
14
(0.58)
102
(4.00)
38
(1.50)
14
(0.56)
17
(0.69)
17
(0.69)
35
(1.38)
mm
(INCH)
8 HOLES
11/16 DIAMETERS
(17)
Figure 5. Yoke Mounting
38b39604‐A
AD44913‐H
A3848‐1
REGULATOR OUTPUT
(SUPPLY CONNECTION
ON OPPOSITE SIDE)
MOUNTING PLATE
(KEY 164)
CAP HEAD SCREW
(KEY 48)
CAP SCREW AND
LOCKWASHER
(KEYS 39 AND 83)
SPACER (KEY 174)
Wall Mounting
See figure 6 for key number locations. The mounting plate is shown in figure 4.
To Next Page
Loading...
