Fisher 4195 KB Series - Parts List - Capsular Element, Bourdon Tube, and Indicator Assembly Components; Capsular Element Assembly Parts (Continued); Bourdon Tube Part Numbers (Continued); Indicator Assembly Parts (Figure 5-27)

4195KA, KB, and KC Series
6–6
Key 1 13 Capsular Element Assembly
(1)
PRESSURE RANGE
MATERIAL
PRESSURE RANGE
Stainless Steel Ni–Span C
Positive
0 to 60 inch wc
0 to 5 psig
0 to 10 psig
3 to 15 psig
58A0708 X012
58A0708 X022
58A0708 X032
58A0708 X042
58A0708 X082
58A0708 X092
58A0708 X102
58A0708 X112
Positive
0 to 15 psig
0 to 20 psig
6 to 30 psig
0 to 30 psig
58A0708 X162
58A0708 X052
58A0708 X062
58A0708 X072
58A0508 X152
58A0708 X122
58A0708 X132
58A0708 X142
Vacuum
–5 to 0 inch Hg
–10 to 0 inch Hg
–20 to 0 inch Hg
–30 to 0 inch Hg
58A0710 X012
58A0710 X022
58A0710 X032
58A0710 X042
58A0710 X052
58A0710 X062
58A0710 X072
58A0710 X082
Compound
–30 to 30 inch wc
–5 inch Hg to 2.5 psig
–10 inch Hg to 5 psig
58A0708 X232
58A0708 X242
58A0708 X252
58A0708 X172
58A0708 X182
58A0708 X192
Compound
–15 inch Hg to 7.5 psig
–20 inch Hg to 10 psig
–30 inch Hg to 15 psig
58A0708 X262
58A0708 X212
58A0708 X282
58A0708 X202
58A0708 X272
58A0708 X222
1. For information on scale compatibility, consult your Fisher sales office or sales representative. Capsular Element Assembly may be ordered as part of the Process/Setpoint
Indicator Assembly (key 56) or ordered separately. See Capsular Element Assembly section for available replacement parts.
Key 383* Bourdon T ubes
PSIG RANGE BAR RANGE PART NUMBER
S31600 (316 SST) Bourdon Tube
0 to 30
0 to 60
0 to 100
0 to 200
0 to 1.6 or 0 to 2
0 to 4 or 0 to 2.5
0 to 6
0 to 10
32B4589 X012
32B4589 X022
32B4589 X032
32B4589 X042
0 to 300
0 to 600
0 to 1000
0 to 1500
0 to 16
0 to 40 or 0 to 25
0 to 60
0 to 100
32B4589 X052
32B4589 X062
32B4589 X072
32B4589 X082
0 to 3000
0 to 5000
0 to 160
0 to 250 or 0 to 300
32B4589 X092
32B4589 X102
N09902 Nickel Alloy (Ni–Span C, Alloy 902) Bourdon Tube
0 to 8000
0 to 10,000
0 to 550
0 to 600
32B4589 X112
32B4589 X122
K-Monel (for NACE) Bourdon Tube
0 to 600
0 to 1000
0 to 1500
0 to 40 or 0 to 25
0 to 60
0 to 100
32B4589 X292
32B4589 X272
32B4589 X282
Key Description Part Number
379 Process Tube Retainer, S30400 (304 SST) 18A8870 X012
380 Machine screw, pan hd, S18800 (18–8 SST) 1H2674 X0012
381 Process tubing ass’y, SST 12B4951 X012
382 Link ass’y, steel/SST 22B0469 X012
383* Bourdon tube See Key 383 table
384 Screw, self–tapping, pl steel (2 req’d) 16A9772 X022
Indicator Assembly (key 101) (figure 5–27)
Note
Key numbers 37, 61, 376, 377, and 378 are not
included as part of the indicator assembly (key
101). If replacing the indicator assembly and
these parts are required, order them separately.
37 Self–tapping screw, S18800 (18–8 SST)
4 req’d to attach process scale (key 61)
to process scale bracket (key 376) 16A6938 X022
61 Process scale, aluminum See Key 61 table
Key Description Part Number
353 Machine screw, pan hd, S18800 (18–8 SST)
(4 req’d) 16A7044 X022
366 Controller Mounting Plate, S18800 (18–8 SST) 38A1735 X012
367 Support bracket ass’y, zinc/brass 16A7013 X012
368 Link ass’y, S18800 (18–8 SST) (2 req’d) 16A7039 X012
369 Process pointer adj ass’y,
aluminum/SST/brass 28A1736 X012
370 Set pt pointer ass’y
aluminum/SST/brass 26A9750 X012
371 Pivot pin, S30200 (302 SST) (2 req’d) 16A7027 X012
372 Washer, plain S18800 (18–8 SST)
(4 req’d) 1V7657 X0012
374 Pointer and bracket ass’y
aluminum/steel 26A7059 X012
375 Set pt indicator ass’y, A93003 (aluminum)
For controllers w/remote set pt 31B2241 X012
For controllers w/o remote set pt 26A7045 X012
*Recommended spare parts