4195KA, KB, and KC Series
6–5
Key 61. Process Scale, V
acuum and Compound Pressure
SCALE RANGE PART NUMBER
Vacuum Pressure
Inches Hg
Scales
5 to 0
10 to 0
20 to 0
30 to 0
1R0003 X0322
1R0003 X0332
1R0003 X0342
1R0003 X0192
Bar Scales 150 to 0 mbar
400 to 0 mbar
0.6 to 0
1 to 0
1R0003 X1632
1R0003 X0592
1R0003 X0602
1R0003 X0612
Compound Pressure
Psig Scales 30 inches wc vac. to 30 inches wc
5 inches Hg vac. to 2.5 psig
10 inches Hg vac. to 5 psig
15 inches Hg vac. to 7.5 psig
20 inches Hg vac. to 10 psig
30 inches Hg vac. to 15 psig
1R0003 X0252
1R0003 X0352
1R0003 X0362
1R0003 X0262
1R0003 X0372
1R0003 X0272
Bar Scales –50 to +100 mbar
–150
to +250 mbar
–0.2 to +0.4
–0.4 to +0.6
–0.6 to +0.8
–1 to +0.6
–1 to +1
1R0003 X1572
1R0003 X0632
1R0003 X0642
1R0003 X0652
1R0003 X1582
1R0003 X0662
1R0003 X1592
Key Description Part Number
131 Machine screw, fill hd, S30400 (304 SST)
2 req’d to attach rate/reset manifold
(key 136) to frame manifold (key 135)
1C1015 35042
135 Frame manifold, A03600 (aluminum)
For all types except w/suffix letter E,
auto/manual station 28A0756 X012
136 Rate/reset manifold, A03600 (aluminum)
For all types except 4195KC Series 28A0747 X012
137 Rate tubing ass’y (for 4195KC Series only)
Copper/aluminum 28A0762 X032
SST/aluminum 28A0762 X042
138 Auto/manual tubing ass’y
Use w/suffix letter E, auto/manual station only
Copper/aluminum 38A2859 X012
SST/aluminum 38A2859 X022
140 Machine screw, fill hd, S18800 (18–8 SST)
Used to attach remote set pt ass’y (suffix
letter M) to indicator ass’y (key 56) 16A7007 X022
162 Machine screw, hex hd, S18800 (18–8 SST)
Used to attach the reset valve (4195KB Series)
or rate/reset valve (4195KC Series) to the frame
For 4195KB and KC Series only 1B8480 X0012
262 Rate/reset valve ass’y (for 4195KC Series only)
Brass bellows
3 to 15 psig (0.2 to 1.0 bar) 39A6013 X052
6 to 30 psig (0.4 to 2.0 bar) 39A6013 X072
SST bellows
3 to 15 psig (0.2 to 1.0 bar) 39A6013 X062
6 to 30 psig (0.4 to 2.0 bar) 39A6013 X082
273 Auto/manual station (suffix letter E) 48A2905 X012
The part number listed for key 273 is for the complete auto/manu-
al station (suffix letter E). Individual ass’y parts are listed in the
Auto/Manual Station subsection of the parts list. Key numbers for
individual ass’y parts also appear in figure 5–31.
310 Lubriplate Mag-1 lubricant
(not furnished with controller)
Key Description Part Number
311 Zink-Plate No. 770 Sealant
(not furnished with controller)
312* O–ring, nitrile
For all types w/suffix letter E,
auto/manual station (3 req’d) 1P8453 X0022
313 Auto/Manual Scale, plastic
For all types w/suffix letter E,
auto/manual station 38A2901 X012
314 Machine screw, fill hd, S18800 (18–8 SST)
For all types w/suffix letter E,
auto/manual station
1C1015 35042
315 Machine screw, fill hd, S18800 (18–8 SST)
For all types w/suffix letter E,
auto/manual station 1B9925 X0012
316 Machine screw, SST
For all types w/suffix letter E,
auto/manual station
1U8841 X0012
317 Molykote No. 33 Grease Lubricant
(not furnished with controller)
318 Dow Corning Comp 111 Lubricant
(not furnished with controller)
339 External feedback ass’y
For controllers w/Bourdon tube or vacuum capsule
Brass tubing 28A7285 X012
SST tubing 28A7285 X022
For controllers w/positive or w/compound capsules
Brass tubing 29A5715 X012
SST tubing 29A5715 X022
362 Spring retaining washer, SST
1B1961 38992
365 Washer, S18800 (18–8 SST) 11B6501 X012
Process and Set Point Indicator Assembly
(key 56) (figures 5–25 and 5–26)
With capsular element ass’y
101 Indicator ass’y
The part numbers listed here for key 101 are for the indicator
ass’y only. Individual part numbers are listed in the Indicator As-
sembly and the Capsular Element Assembly subsections of this
parts list. Key numbers for individual ass’y parts also appear in
figures 5–27 and 5–28.
For use w/o remote set pt 39A1126 X012
For use w/remote set pt 39A1126 X022
113 Capsular element ass’y See Key 113 table
The part numbers listed in the key 113 table are for the complete
capsular element ass’y. Individual ass’y parts are listed in the
Capsular Element Assembly subsection of this parts list. Key
numbers for individual ass’y parts also appear in figure 5–27.
127 Machine screw, fill hd, S18800 (18–8 SST)
4 req’d to attach the capsular element ass’y
to the indicator ass’y (key 101) 1J8415 X0012
With Bourdon tube
101 Indicator ass’y
The part numbers listed here for key 101 are for the indicator
ass’y only. Individual part numbers are listed in the Indicator As-
sembly subsection of this parts list. Key numbers for individual
ass’y parts also appear in figure 5–27.
For use w/o remote set pt 39A1126 X012
For use w/remote set pt 39A1126 X022
*Recommended spare parts
To Next Page
Loading...
