EasyManua.ls Logo

Fisher CZ-7a PRO Quicksilver - Maintenance; Routine Care and Cleaning

Fisher CZ-7a PRO Quicksilver
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Your CZ-7a Pro doesn't require a lot of care. It's built with high-
quality materials and it's splashproof and dustproof. But there
are a few things you should do to keep it in peak operating
condition.
1. If you're not going to be using it for a while,
take the batteries out. Acid damage caused by
leaking batteries can be severe.
2. Avoid extreme temperatures. Don't leave it
inside a closed car that's sitting in the sun. Or
even worse, the trunk of a car.
3. If you "scrub" the search coil on the ground,
you'll eventually wear through the bottom of the
coil. Replacement coils are expensive. Instead,
invest in a coil cover; they're cheap.
4. Keep your CZ-7a Pro dry and clean. If you've
been working in or around salt water or dust,
wipe it down with a damp cloth and dry it with a
hair dryer (low or no heat) or a dry cloth.
Remove and clean the lower stem. Keep the
lock nuts free of sand and dirt.
43

Related product manuals