10
Fig.5.4
Fig 5.3
Under on/off state of the unit, press Fan button, fan speed of indoor unit will change as below:
As shown in Fig.5.4
(Indoor unit can only run at high fan speed mode and fan speed can’t be modified by wired controller.)
Under on state of unit, press Function button till the unit enters swing control function and then
press “Enter/cancel “ button to turn on turbo control function.
During swing function, press Function button till the unit enters swing control function and then
press Enter/cancel button to cancel swing control function.
Swing control function setting is shown in Fig 5.5
There is no this function for this unit.
5.4 Fan Speed Setting *
5.5 Swing Control Function *