5
3、Buttons
Fig. 3.1 Silk screen of buttons
No. Description Function of Button
1
Enter/cance
l
（1）Function selection and canceling;
（2）Press it for 5s to enquiry the outdoor ambient temperature.
2
▲
6
▼
（1）Running temperature setting of indoor unit, range :16～30℃
（2）Timer setting, range:0.5-24hr
（3）Switchover between quiet/auto quiet
3 Fan Setting of high/middle/low/auto fan speed
4 Mode Setting of cooling/heating/fan/dry mode of indoor unit
5 Function Switchover among the functions of air,/sleep/turbo/save/e-heater/blow /quiet
7 Timer Timer setting
8 On/off Turn on/off indoor unit
4 Mode
and
2
▲
Memory
function
Press them for 5s under off state of the unit to enter/cancel memory function
(If memory is set, indoor unit after power failure and then power recovery will
resume original setting state .If not, indoor unit is defaulted to be off after
power recovery. Memory function is defaulted to be off before outgoing.)
3.1 Silk Screen of Buttons
3.2 Instruction to Function of Buttons
To Next Page
Loading...
Need help?
General
