4
mode
5 Cooling Cooling mode
6 Dry Dry mode
7 Fan Fan
8 Heating Heating mode
9 Defrost Defrosting state
10
Gate-control
card
Gate control
11 Lock Lock state
12 Shield
Shielding state (buttons, temperature, on/off, mode or save is shielded by
long-distance monitoring
13 Turbo Turbo function state
14 Memory
Memory state (Indoor unit resumes original setting state after power failure
and then power recovery)
15 Twinkle Flicking when unit is on without operation of buttons
16 Save Energy-saving state
17 Temperature Ambient/setting temperature value
18 E-Heater Mark that E-heater is allowed to turned on
19 Blow Blow mark
20 Timer Timer-displayed location
21 Quiet Quiet state(two types: quiet and auto quiet)
There is not Master and CO2 functions for E series ducted type unit and A2 ducted type and cassette
type units
Table 2.1
To Next Page
Loading...
Need help?
General
