29
Note:
1． For upper unit checks 16 lower units consecutively, there will be no more than 16 seconds delay
when setting works till unit responds.
2． Please let us know your requirement before your placing the order, for this WEEKLY TIMER will only
be prepared when customer orders(communication joint with WEEKLY TIMER on manual control had
been prepared).
1. Press ▲ or ▼ to select the unit that needed to be control. It is available to control several units by
Group Control (1~16), or control single unit by Single Control.
2. When selected a certain or several units by Single Control or Group Control, Timer setting and On/off
setting can be set. Timer setting can set 4 on/off times in a day in one week; and on/off setting can be
done by pressing on/off button.
3. Connection between WEEKLY TIMER and manual control is shown as following:
4、please check the manual to read how to set the address of manual.
To Next Page
Loading...
