Name: Fisher Gold Bug
Brand: Fisher
Rating: 5 (1 reviews)

To Next Page

To Previous Page

HIPMOUNTING

Your Gold Bug is light and extremely well balanced however,

if you're going to be swinging it for more than a few hours you

may want to convert it to a "hipmount".

1. Disconnect the cable from the housing or make

sure you have at least 8 inches of slack cable

between the housing and upper stem.

2. Grab the control housing and slide it off the

handle by pulling it to ward the arm rest.

3. Put your belt through the slots on the underside

of the housing.

4. Left handers should wear the housing on their

right hip and right handers on their left hip.

NOTE: if you’re working in shallow water, you may want

to strap the control housing on your chest in a heavy

plastic bag, and seal it tightly around the cable.

The Gold Bug control housing

can be hipmounted to reduce

weight on the stem and create

nearly effortless hunting. Belt

loops are provided on the under-

side of the control housing.

Other manuals for Fisher Gold Bug

Questions and Answers:

Need help?

Do you have a question about the Fisher Gold Bug and is the answer not in the manual?

General