34
Scale Location: choose between left or right hand side scales
Sound: ability to turn on and off sound for detecting fish
Drop pin: will create GPS location and save the information to
that GPS location. Can be later found on the map screen.
Screenshot: will take a screen shot of what's on your screen and
save it to your camera roll
Raw View or Fish View: switch between Raw View and Fish View
SIDE MENU OPTIONS
Shallow Water: will adjust the scale on your screen to be
between 1.4ft-15ft and adjust the settings to give you the best
results when in less than 15ft of water. Please note that you must
adjust the power slider when in this mode. Failure to adjust the
power slider to your water conditions can result in the FishHunter
giving you incorrect bottom values.
Select number of ft: this is where you gain control to accurately
set the approximate depth you are fishing at. All settings allow
for you to adjust the power slider, surface filter and fish
sensitivity to your individual preference.
Auto Range: the screen will take a few seconds to “find the
bottom” depth for the area and adjust its settings automatically
to balance the gain and pulse width of your sonar to give you the
best results.
To Next Page
Loading...
