EasyManua.ls Logo

FishHunter Pro - Trolling -Transom Mounting

FishHunter Pro
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
Trolling –Transom Mounting:
If you are having trouble with the connection to your phone or
tablet when trolling using your leash or you would like to try to
troll the FishHunter at a faster rate, you can attach the unit to
the back of the trailer mount of your fishing boat. Please follow
the steps below:
You are going to be attaching the FishHunter to the trailer
mounting bracket on the back of your boat.
You will want the FishHunter to be about 6-10 inches
behind the back of the boat when you are finished, so it
will float freely in the water. The actual length required will
depend on the height of your trailer mounting bracket.
A higher bracket means you will need slightly more line.
The goal here is to have the FishHunter sitting flat on the
water with about 6 inches of line free after it is attached to
boat. This will allow the FishHunter to sit flat in the water
while you are trolling it.
You can watch "Making a Boat Mount" video at:
www.fishhunter.com/support

Other manuals for FishHunter Pro