43
You can eliminate this by either moving the FishHunter just
behind your seat as explained above, OR you can switch to
FISH VIEW and use the surface slider to adjust to eliminate the
area where your paddle/pedaling is appearing.
Tin/Metal Boat Fishing:
When reeling into the boat you will notice that in some cases as
the FishHunter gets close to the boat
(under 5 ft) you will start to see the boat in the RAW data or
views screens. This is due to the power of the transducers that
we are using and their reflection off the side of your boat. When
the unit is right beside the boat most of this reflection will
disappear.
Drifting (no motor running):
For drifting we recommend that you use our 15 ft leash to
attach your FishHunter to the top/side of your boat. This will
allow you to have both hands free to focus on
fishing. As you drift along, the FishHunter will be giving you
a strong reading for the area around the floating sonar and
your boat. This is perfect when you want to fish close to your
boat.
With a range of over 150 ft, you can also attach the
FishHunter to a fishing rod and then cast it into the area that
you would like to drift it across. This will allow you to fish a
much broader area and also allow you to cast directly at your
FishHunter.
3
To Next Page
Loading...
