42
I. Attach your tether to the side of your kayak
(Note: in the below we have attached it to the kayak handle).
II. Allow enough line to ensure your FishHunter will be behind
your seat. When you are moving along (in this case we have
used about 4 ft of the tether) the FishHunter may bounce off
the side of your kayak from time to time, but that will not im-
pact its performance.
You may notice in the RAW VIEW that you will be able to see
your paddle/pedal strokes in the surface noise. This does not
impact the performance of your sonar and is due to the fact
that the sonar is floating directly behind your kayak.
To Next Page
Loading...
