FishHunter Pro - HOW TO CONNECT

8
HOW TO CONNECT
Download the FishHunter App from the Google store or iOS app
store.
Create an account by opening the app and following the steps
on the screen. Please be sure to do this before you leave your
coverage area.
Ensure you have charged your FishHunter PRO for minimum of
4 hours before first usage.
Attach your FishHunter PRO to the braided line on the end of
your fishing line or tether it to the red leash that was provided
in your box by threading the red leash through the tow point on
the front of your FishHunter PRO. OR by attaching the fishing
hook onto the front of your sonar and the end of the red leash
provided.
Drop the FishHunter PRO into the water beside your current
position.
The sonar will automatically turn on when placed in water and
will begin slowly flashing red from the top of the sonar. If you
don’t see any lights then the FishHunter is not charged.
Open your Wi-Fi settings on your smartphone or tablet.
Refresh the list and select “FishHunter Wi-Fi XXX".
[Note: It may take up to 1 minute to appear]
Wait for your phone/tablet to tell you that you are connected
to FishHunter Wi-Fi. You will also see a check mark on your
Wi-Fi settings to show you are connected.
Note: other phones or tablets can cause connection errors.
Ensure their Wi-Fi settings are turned off.
1
2
3
4
5
6
7
8