29
Specifications
Input impedance: 10M Ohm
Input trim gain range: -10dB to +2dB
Nominal Output impedance: 3.5k Ohm
Maximum Output level (onset of clipping): +3dBV
Digital signal path:
A/D, D/A conversion: 24-bit
Signal processing: 32-bit
Baseline noise: -97dBV
(
A-weighted
)
Dynamic range: 100dB
(
A-weighted
)
Power supply: 9V battery or 9VDC adapter
Typical in-use current consumption: 25mA
Typical 9V battery life: 20 hours using alkaline battery
40 hours using lithium battery)
9V adapter: Fishman 910-R
(
for 110V
)
or suitable ltered and regulated,
200mA type, tip = negative
Tone Controls:
Low (bass) control:
±12dB @ 70Hz
Midrange control:
±12dB @ 1kHz
High (treble) control:
±12dB @ 6.5kHz
Anti-Feedback Notch Filter (3 notches): 100Hz Default Frequency
50Hz to 750Hz Search Range
0.25 Octave bandwidth
13.5dB Attentuation
Phase switch: Forward position = non-inverting
All specications subject to change without notice
To Next Page
Loading...
