2022 Fisker Ocean
4. Access to the Occupants
37
Hood
WARNING: Never work on a vehicle that is plugged in. Always remember to
unplug the vehicle before working under the hood or underneath the vehicle.
See Disconnecting the Charge Cable, page 29
.
Unbolting the hood
The hood can only be unlatched using the following process:
1. Using a plastic trim removal tool (or similar tool), apply careful pressure to
release the clips securing the service lid in place. Remove the service lid.
2. Remove the two bolts securing he hood (magnetic 13mm hex socket) Torque to
19 Nm on re-install (Do Not use power tools or over-tighten)
To Next Page
Loading...
