. To switch between wrist and clip modes, tap the
setting îtap YES to confirm.
Note that when Inspire 3 is set to CLIPPED on Body
, certain features are turned off, including heart-
rate tracking, automatic exercise tracking, and Active
Zone Minutes.
Water lock
Turn on the water lock setting when you're in water, for
example showering or swimming, to prevent the
screen and buttons on your tracker from activating.
When water lock is on, your screen and buttons lock,
and the water lock icon appears at the bottom.
Notifications and alarms still appear on your tracker,
but you must unlock your screen to interact with them.
To turn on water lock, swipe down from the clock
screen tap Water Lock firmly tap your screen
twice. To turn off water lock, firmly double-tap the
middle of the screen with your finger. If you don't see
"Unlocked" appear on screen, try tapping harder.
Turning off this feature uses the accelerometer in your
device, which takes more force to activate.
Note that water lock turns on automatically when you
start a swim in the Exercise app .
Settings app Tap the Settings app to open it. For more
information, see "Adjust settings" on the next page.
19
To Next Page
Loading...
Need help?
General
