1. Turn on Bluetooth and GPS on your phone.
2. Make sure Inspire 3 is paired to your phone.
3. Make sure the Fitbit app has permission to use GPS or location services.
4. Check that GPS is turned on for the exercise.
1.
Open the Exercise app and swipe up to find an exercise.
2. Tap the exercise, then swipe up and make sure GPSis turned on.
5. Keep your phone with you while you exercise.
To track an exercise:
1.
On Inspire 3, swipe left or right to the Exercise app , then swipe up to find
an exercise.
2. Tap the exercise to choose it. If the exercise uses GPS, you can wait for the
signal to connect, or start the exercise and GPSwill connect when a signal is
available. Note that GPS can take a few minutes to connect.
3.
Tap the play icon to begin the exercise, or swipe up to choose an exercise
goal or adjust the settings. For more information on the settings, see
"Customize your exercise settings" on the next page.
4. Tap the middle of the screen to scroll through your real-time stats. To pause
your workout, swipe up and tap Pause .
5.
When you're done with your workout, swipe up and tap Pause Finish
. Your workout summary appears.
6. Swipe up and tap Done to close the summary screen.
Notes:
l If you set an exercise goal, your tracker alerts you when you’re halfway to your
goal and when you reach the goal.
l If the exercise uses GPS, "GPSconnecting..." appears at the top of the screen.
When the screen says "GPSconnected"and Inspire 3 vibrates, GPSis
connected.
37
To Next Page
Loading...
Need help?
General
