How to fix FKG dental equipment that cannot turn on?
If your FKG dental equipment won't turn on, it might be due to a low battery. Please charge it in time. Alternatively, the battery may have failed, requiring a battery replacement.
What to do if the FKG Rooter Universal motor does not start?
If the motor of your FKG dental equipment isn't starting, it could be due to low voltage protection. Please charge the device. Another possibility is that the contra angle is stuck, in which case you should clean or replace it.
Why my FKG Rooter Universal Dental equipment battery cannot charge?
If you're unable to charge the battery of your FKG dental equipment, first ensure that the adapter is reliably connected. If the connection is secure and it still won't charge, the battery may have failed and require replacement.
Why does the FKG Rooter Universal Dental equipment battery run out quickly?
If the battery of your FKG dental equipment is draining quickly, it might not be charging for long enough. Ensure you charge it for more than 5 hours. Another reason could be battery aging, indicating it's time for a replacement.
What to do if apex locator of FKG Rooter Universal Dental equipment is imprecise?
If the apex locator on your FKG dental equipment is imprecise or not sensitive, check the test wire connection. Reconnect the test wire, or connect the file clip to the lip hook directly to check the connection status. Also, the test wire may have an open or short circuit, so try replacing it.
Why is the torque value high when the FKG Rooter Universal Dental equipment motor is running?
If the torque value is high when the motor of your FKG dental equipment is running, it could be due to contra angle wear, causing increased resistance. Enter the setup mode and run the calibration procedure. If calibration fails, replace the contra angle.
Importance of safety precautions and following recommendations.
Describes the three available operating modes.
Information on using pre-set file systems and parameters.
Instructions on starting/stopping motor and changing rotation direction.
Explanation of the auto-reverse function based on torque limits.
How to adjust the speed and torque settings.
Details on creating and using custom Rotary and Recipro file systems.
Explanation of the Apex Locator mode display and measurement procedure.
Steps for connecting components for Multi-function Mode.
Procedure for calibrating the device.
Procedures for drying and sterilizing components.
General| Brand | FKG |
|---|---|
| Model | Rooter Universal |
| Category | Dental equipment |
| Language | English |
To Next Page