9 Troubleshooting and Servicing Information
Many problems and issues can be related to one of the following causes:
Improper antennas or antenna cables used
Incorrect antenna or antenna cable installation
Incorrect configuration
Aging or breaking of components under normal or abnormal wear (device,
cables, antennas, connectors, connector pins)
No valid GNSS position (e.g., aircraft is inside)
Configure the system using FLARM Hub (see Section 4.1).
If an error is indicated, a list of error codes can be found in Appendix A. Many
issues can also be resolved by consulting the FAQ:
https://support.flarm.com/
For support requests it is recommended to create a support package according to
Section 4.4.
Atom UAV may only be repaired by FLARM Technology Ltd or its authorized service
partners.
To Next Page
Loading...
