What to do if my FLARM FUSION PowerFLARM has no valid GNSS position?
If your FLARM Industrial Equipment is not displaying a valid GNSS position, ensure that you have followed all installation instructions and other guidelines.
How to fix incorrect configuration of FLARM FUSION PowerFLARM?
If you have an incorrect configuration for your FLARM Industrial Equipment, configure the system using FLARM Hub (see Section 3.4 as well as Section 5).
What to do if FLARM FUSION PowerFLARM uses improper antenna?
If you are using improper antennas or antenna cables with your FLARM Industrial Equipment, ensure that you have followed all installation instructions and other guidelines.
General| Weight | 160 g |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Transmit Power | 25 mW |
| Communication Protocol | FLARM, NMEA |
| Interfaces | RS-232, USB |
| Antenna Connections | 2 x SMA |
| Antenna | External antennas |
Details the components and architecture of the PowerFLARM Fusion system.
Discusses the importance and requirements for FLARM Compatible displays.
Explains how to connect to the FLARM Hub via Wi-Fi.
Introduces the configuration pages for FLARM, Wi-Fi, Bluetooth, and FLARM Hub.
Explains how to configure FLARM settings interactively or via a file.
Details how to configure Wi-Fi and Bluetooth settings for device identification.
Covers settings specific to the FLARM Hub interface.
Explains how to update the PowerFLARM firmware, obstacle database, and FLARM Hub firmware.
Covers critical settings like aircraft type, transponder type, and ICAO address.
Discusses the role and certification of FLARM Compatible displays.
Details the warnings issued based on predicted collision time and levels.
Explains the integration of ADS-B and Mode-S transponder signals for traffic detection.
Covers collision warnings for static obstacles like masts and power lines.
Emphasizes the necessity of yearly firmware updates for compatibility and functionality.
To Next Page
