FUSION USER AND
MAINTENANCE
Version: 1.0
Page: 17 of 49
Hinterbergstrasse 15
CH-6330 Cham
FTD-078
3 FLARM Hub
FLARM Hub is the web app that makes configuring and maintaining FLARM easier
than ever before. It runs directly on the Wi-Fi network of Fusion and can be used
from any smartphone, tablet, or computer.
The following main features are available in FLARM Hub:
Device status
Firmware updates
Interactive configuration
Obstacle database update
IGC file download
Traffic Monitor
Interactive Data Port
Integrated CARP Range Analyzer
Diagnostics
FLARM Hub pages can be printed to paper or PDF for documentation purposes,
using the browser’s print function.
3.1 Connection
Connecting to FLARM Hub is done over Wi-Fi. Fusion presents its own Access Point
(AP) to which a client device can connect. The Wi-Fi is identified via its name
(SSID). When accessing it, the user is prompted to enter the password. SSID and
password can be set in the configuration to restrict access.
Fusion comes with a default SSID and password programmed. Both values are
printed on the black serial number sticker on the device. The sticker also contains
a QR code which can be used to easily connect, provided the SSID and password
have not been changed. For this, simply scan the QR code with the phone’s camera
app. An additional device sticker is included with the device and can preferably be
attached to maintenance documentation to facilitate future connections.
Note: A phone or computer can usually be connected to only one Wi-Fi network
at a time. When connecting to Fusion, you may thus lose Wi-Fi connectivity
to the internet. Phones with a data plan can use the internet while
connected to Fusion.
To Next Page
Loading...
