FUSION USER AND
MAINTENANCE
Version: 1.0
Page: 43 of 49
Hinterbergstrasse 15
CH-6330 Cham
FTD-078
13.3 Installation of Mode-S Transponder or ADS-B Out
Equipment
If a Mode-S transponder or separate ADS-B Out equipment is installed in the
aircraft, it must be ensured that both the transponder/ADS-B Out equipment and
the FLARM system is configured to the correct (identical) 24-bit ICAO aircraft
address. Otherwise, FLARM may indicate ownship as another aircraft and/or
systems in other aircraft may show duplicate aircraft.
To Next Page
Loading...