FLARM FUSION PowerFLARM - Factory Reset

POWERFLARM
FUSION USER AND
MAINTENANCE
MANUAL
Date: 2020-11-10
Version: 1.0
Page: 12 of 49
FLARM Technology Ltd
Hinterbergstrasse 15
CH-6330 Cham
Document Number:
FTD-078
Status GPS Transmit Receive
BOOTLOADER
Initialization
————
————
————
————
Serial port recovery update
————
————
————
————
Safe update
————
————
————
————
Firmware check error
————
————
————
————
Firmware check successful,
booting application
————
————
————
————
FIRMWARE
Initialization
————
————
————
————
Non-fatal error
————
————
————
————
Fatal error
————
————
————
————
Operation in progress
(obstacle database
installation, IGC readout, etc.)
———— ———— ———— ————
Nominal state, no GPS fix
————
•—•—•
————
————
Nominal state, 3D GPS fix,
transmitting
————
•—•—•
————
————
Nominal state, 3D GPS fix,
transmitting and receiving at
least one aircraft
————
•
—
•
—
•
————
– – –
The LED lights are also visualized in FLARM Hub on the Status page (see Section
3.3).
1.3.3 Factory Reset
PowerFLARM Fusion can be reset to factory defaults if required. The following items
are reverted to factory default:
 FLARM configuration
 FLARM Hub configuration
 Wi-Fi SSID and password
 Bluetooth name
The following items are removed/deleted:
 IGC flight recordings
 FLARM Hub device lock