FUSION USER AND
MAINTENANCE
Version: 1.0
Page: 23 of 49
Hinterbergstrasse 15
CH-6330 Cham
FTD-078
Items that must be configured before use are listed in Section 5.1.
3.4.2 Wi-Fi and Bluetooth
Changing Wi-Fi and Bluetooth settings and network names is optional, e.g. to make
it easier to identify a particular device by using the aircraft tail number. The default
password is secure in the sense that it is generated randomly for every Fusion, i.e.
it cannot be found out without access to the device or the sticker. It can be changed
(e.g. to have the same password for the entire fleet) or even removed.
Note: If SSID or password are changed, it will not be possible to access the Wi-Fi
interface using the QR code on the device sticker. The QR code on the
Status page will be updated and hence can still be used, e.g. when printed.
Note: To recover from a lost password (Wi-Fi or device lock), the device needs
to be reset to factory defaults.
3.4.3 FLARM Hub Settings
3.4.3.1 Device Lock
To prevent unauthorized persons from modifying the configuration, the
configuration can be locked by a password. Set a password that is different from
the Wi-Fi password. Users will still be able to access FLARM Hub but will not be
able to change the locked configuration items.
Note: Users with physical access to Fusion will be able to change the
configuration by using a USB flash drive as well as reset the device,
including all passwords, by using the hardware reset pin (see Section
1.3.3).
3.4.3.2 Language Selection
FLARM Hub can be used in different languages. To change the language, click on
the desired language. The language in the user interface is updated immediately
without having the refresh the page. The setting is saved in the browser for each
user. The currently support languages are French, German, and English.
3.5 Firmware and Obstacle Updates
The PowerFLARM firmware, obstacle database, and FLARM Hub firmware can be
updated under the Maintenance menu section.
The PowerFLARM firmware must be updated at least every 12 months as part of
the annual maintenance. See Section 9 for details.
To Next Page
Loading...