1 Introduction
Atom UAV is a FLARM device developed specifically for UAVs. Leveraging the Atom
platform, it is a miniature, feature-packed device that can be used standalone as
an add-on or retrofit or integrated into other designs.
Highlights:
Based on the FLARM Atom System-on-Chip platform
Full, worldwide FLARM interoperability
Cortex-M4F processing core
Integrated Wi-Fi and Bluetooth module
72-channel u-blox GNSS engine
Web app for configuration and diagnostics
1090MHz receiver for ADS-B and rebroadcast (TIS-B/ADS-R)
Barometric sensor for pressure altitude
Consolidated, unified traffic stream on JSON or MAVLink
Direct broadcast remote ID, compliant with ASTM F3411-19, EC 2019/945, EC
2020/1058
Atom UAV is available in two functionally equivalent variants:
Atom UAV: For standalone use, housed in a plastic enclosure, using a JST GH
connector for power supply and data streaming, and an integrated Wi-Fi
antenna. Ships with a complete set of antennas and cables.
Atom UAV OEM: Board only, for embedded use with a board-to-board data
connector and RF connectors for using dedicated antennas. Does not contain
the antennas or cables.
To Next Page
Loading...
