Flashforge Adventurer 4 - Notice; Electrical Safety; Personal Safety

2 3
English
3D Printer Quickstart guide
Art.no 38-8923 Model ADVENTURER 4
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technical data. In theevent of technical
problems or other queries, please contact our Customer Services (see address
details on theback).
Safety
Follow thesafety guidelines below. Make sure that you have read and
understood all thesafety instructions and warnings in any other documents
included with this product and its accessories.
• Keep thework area clean and well lit. Cluttered or dark areas invite accidents.
• Never use theproduct in areas where explosive gases or liquids are stored.
• Never use theproduct when you are tired, sick, under theinfluence of alcohol
or medicine.
• Always unplug themains lead when moving theproduct for service or maintenance.
• If extension leads are used, ensure that they are designed for thepurpose for
which they are intended to be used.
• Only use earthed power points with avoltage rating which correspond to
thespecifications listed on therating plate of theproduct.
• Do not place themains lead where it can be crushed or damaged by sharp edges.
• Never use theproduct if it or themains lead is damaged in any way.
• Never try to open thehousing or try to repair theproduct in any way.
The product contains no user-serviceable parts.
• Never attempt to tamper with or modify theproduct in any way.
• Do not place theproduct where it is exposed to moisture or affected by water
or any other types of liquids. Avoid exposing theproduct to direct sunlight,
dust or extremely cold or hot environments. The product is designed to
function optimally in temperatures of 15−25 °C (59−77 °F) and at ahumidity
level of 20−50 %.
• Tie back any long hair and ensure that no loose clothing or jewellery risks
coming into contact with any moving or hot parts of theproduct.
• Place theproduct on astable, even surface and at asafe distance from all
flammable materials.
• Never store or place metal objects or any type of liquids within theprinting
area or on top of theproduct. Doing so could lead to fire, electric shock or
other personal injury.
• Only operate theproduct in well-ventilated areas.