01
02
03
04
05 06
07 08 09 10
11 12 13
14
15 16 17
18
19
20
21
22
23
24
25 26
27
28
29
30
31
32
Note: Please prepare 2.0mm and 2.5mm Allen wrenches, and a
Phillips screwdriver for installation. As screw types may vary, please
select tools according to the actual screws.
*Note: Due to possible variations or differences in screw types, the
actual accessories may differ from the images. Please refer to the
actual accessories. Flashforge reserves the right of the final
interpretation of this Guide.
Accessory Package Contents
Top Cover Front Door Plate Side Plate ×2 Drag Chain
Drag Chain Clip Extruder Top Cover
PTFE Tube (91mm×2)
PTFE Tube (150mm)
PTFE Tube (515mm) Screw ST2.9*9.5 ×11 Screw M3*8 ×7 Screw M4*6 ×20
Screw M3*25 ×2 Screw M3*20 ×2
Magnet 5*3 ×33
Screw M3*16 Nut M3 ×7
To Next Page
