Flashforge Guider II Assembly Instruction

This guide is only applicable to FLASHFORGE Guider2/2s 3D printer
Replacement of
High-temperature
Extruder for Guider II/ IIs
Tel: +86 579 82273989 Web: www.flashforge.com Add: 2/F, No.518, Xianyuan Road, Jinhua, Zhejiang, China
After-Sales Service: support@ff3dp.com
Amazon.com orders only: 597891915@qq.com

Flashforge Guider II Specifications

General

Display diagonal	5 \
Bundled software	FlashPrint
Accuracy	0.2 mm
Print technology	-
Printing material	ABS, Polylactic acid (PLA)
Layer thickness (min)	- mm
Maximum build size (WxDxH)	250 x 280 x 300 mm
AC input voltage	100/240 V
Power consumption (typical)	500 W

Weight and Dimensions

Depth	549 mm
Width	490 mm
Height	561 mm