Flashforge Guider II Quick Start Guide

This guide is only applicable to FLASHFORGE Guider II 3D printer
The User Guide is in the USB stick.
1. Hot! Avoid touching the heating nozzle in operation.
2. Moving parts in printer may cause injury. Do not wear gloves
or other sources of entanglement in operation.
WARNING
USERGUIDE
GUIDER II
Quick Start Guide
SZ11-EN-A02

Flashforge Guider II Specifications

General

Display diagonal	5 \
Bundled software	FlashPrint
Accuracy	0.2 mm
Print technology	-
Printing material	ABS, Polylactic acid (PLA)
Layer thickness (min)	- mm
Maximum build size (WxDxH)	250 x 280 x 300 mm
AC input voltage	100/240 V
Power consumption (typical)	500 W

Weight and Dimensions

Depth	549 mm
Width	490 mm
Height	561 mm