Fleck 2750 User Manual

MODEL 2750 DOWNFLOW
Job Specification Sheet
Printed in U.S.A.
* JOB NO._________________________________________________________
* MODEL NO. ______________________________________________________
* WATER TEST_____________________________________________________
* CAPACITY PER UNIT ___________________________
* MINERAL TANK SIZE DIA. ______HEIGHT_________
* BRINE TANK SIZE & SALT SETTING PER REGENERATION:
_________________________________________________________________
Page 2
* 2750 CONTROL VALVE SPECIFICATIONS
1) Type of Timer (see pages 16,17, & 18)
A) 7 day or 12 day
B) *310 to 5,270 gallon meter or
*1,550 to 26,350 gallon meter
* Other _______________________________________________________
C) Meter Wiring Package
1) System #4 - 1 tank; 1 meter; immediate or delayed regeneration
2) System #5 - 2 tanks; 2 meters; interlock
3) System #6 - 2 tanks; 1 meter; series regeneration
4) System #7 - 2 tanks; 1 meter; alternator
2) Timer Program Settings (see pages 18 and 19)
A) Backwash _______________________ min.
B) Brine & Slow Rinse ________________ min.
C) Rapid Rinse _____________________ min.
D) Brine Tank Refill___________________ min.
3) Drain Line Flow Controller ______________ gpm
4) Brine Line Flow Controller ______________ gpm
5) Injector Size # _______________________
6) Service Valve Operation Units (SVO)
Size of Service Valve _______________________________________________ .

Fleck 2750 Specifications

General

Brand	Fleck
Model	2750
Category	Control Unit
Language	English