Need help?Do you have a question about the Fleck 9000 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Valve Type | Piston |
| Valve Size | 1 inch |
| Regeneration | Upflow or Downflow |
| Programming | Microprocessor |
Details timer, meter, and regeneration program settings for the control valve.
Covers water pressure, electrical, plumbing, location, and bypass valves.
How to adjust the backwash duration using pins on the program wheel.
How to adjust the brine and slow rinse duration.
How to adjust the rapid rinse duration using pins.
How to adjust the brine tank refill duration.
Lists specific parts like screws, motors, gears, and switches for the drive assembly.
Lists specific parts like valve body, pistons, O-rings, and injector components.
Lists parts like housing, gears, switches, motors, and knobs for the timer.
Addresses softener regeneration, water hardness, salt usage, and pressure issues.
Addresses brine draw, continuous cycling, and drain flow problems.
Provides data on tank size, injector, flow rates, and timer settings.
To Next Page
