Need help?Do you have a question about the Fleck 3200 ET and is the answer not in the manual?
General| Backwash | Yes |
|---|---|
| Model | 3200 ET |
| Type | Control Unit |
| Control Type | Electronic Timer |
| Valve Size | 1 inch |
| Timer | Electronic |
| Cycle Settings | Adjustable |
Details the functionality of various buttons on the valve unit for operation and programming.
Details operation for Meter Valves (immediate/delayed regeneration) and Timeclock Valves.
Describes valve behavior and display during regeneration cycles for ET and RM timers.
Explains how the valve operates and retains data during power interruptions.
Configuration of water hardness, system capacity, and regeneration time.
Setting the durations for regeneration cycles 1 through 6.
Procedure for exiting program level 1 and returning to normal operation.
Configuration of flow rate, regeneration history, capacity, and chlorination indicator.
Setting start and end times for auxiliary relay outputs #1 and #2.
Setting timer and volume triggers for the chemical pump.
Configuring regeneration override, volume override, display format, valve type, and regeneration type.
Setting the size of the installed flow meter.
Indicating the physical location of the mixing valve.
Setting the system type, such as single valves or interlocked systems.
Enabling or disabling program lockout to prevent unauthorized changes.
Procedure for exiting program level 2 and returning to normal operation.
To Next Page
